2 way 1 inch 12v electric solenoid valve

Note: DC 12V or 24V solenoid valve needs to work with a power adapter of 2A or above. Material of valve body and coil: 100% Brass Solenoid valve type: Normally Closed (N.C.) (power on, solenoid valve open power off, solenoid valve close) Working Voltage: DC 12V, DC 24V, AC 220V, AC 110V optional It should not be mounted upside down, with the coil underneath the valve. Fasco Type: Inducer Fan Power Source: Corded Electric Voltage: 208v-230v Amperage. It can be mounted vertically or horizontally, and features a conveniently positioned arrow on the body to indication the direction of flow. 02424115701 Source 1 1/20HP Fasco Industries Inc 7162-3067 Type. It works across various media, such as hot water, gas, air, water, diesel, gasoline, weak acids, weak alkali, low viscosity fluids.Ĭannot be used in strong acids, strong bases. This DC 12 volt 24V or AC 110V 220V 1” inch female threaded two-way normally closed (N.C.) type electric solenoid valve.Ĭommonly use in Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics and plumbing fixtures. *Consult a chemical compatibility expert for correct seal and valve body material choice.12V 24V 110V 220V 1' 2 Way Electric Brass Solenoid Valve (Model: 0022102) A pre-filter should be installed to prevent the valve from leaking caused by debris. Installed with the coil up is the preferred method however the valve will operate in any position. There is an arrow indicating the direction of flow on the stainless valve body. Installation: The coil has no polarity making power and ground interchangeable. The coil has 5.5” lead wire connections for easy installation. This coil requires 18 watts or 1.5 amps to operate the valve. The valve includes a 12 Volt DC coil that has a voltage tolerance of +-10%. The orifice size of the SZW-25-12VDC is 25mm allowing a higher flow rate when compared to other comparable solenoid valves. This makes it ideal for gravity fed applications. This SZW-25-12VDC has no minimum pressure requirements and can operate up to 115PSI. This valve requires 18 watts from a DC power source typical to that of a car battery. It is suitable for temperatures from 15☏ up to 250☏. The valve features a solid stainless steel body with a Viton seal.

This valve is compatible with a variety of media such as air, water, gas, diesel fuel, weak acids and glycol. The SZW-25-12VDC is a 12 Volt DC, 1” Stainless Steel, 2-way Solenoid Valve.

2 way 1 inch 12v electric solenoid valve